LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) (2.0L) - Introduction >> Clear Memory Mode >> Operation >> SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor

  1. On «Start» display, select «Diagnosis».
  2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
  3. On «Main Menu» display, select «Each System».
  4. On «Select System» display, select «Engine Control System» and then select «Enter».
  5. On «Select Function» display, select «DTC».
  6. On «DTC» display, select «Clear Memory».
    NOTE:
    • Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
    • For detailed operation procedures, refer to "Application help".
scientia non olet · About LEMON Manuals