LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) (2.0L) - Introduction >> Drive Cycle >> Procedure >> Drive Cycle E
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Cycle E

DTC Item Condition Number of driving cycles on the detecting condition
P0461 FUEL LEVEL SENSOR "A" CIRCUIT RANGE/PERFORMANCE - 2
  1. Make sure that the battery voltage is 10.9 V or more.
  2. Perform the Clear Memory Mode. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>CLEAR MEMORY MODE .
  3. Drive for approximately 30 L (7.9 US gal, 6.6 Imp gal) of fuel.
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
  4. Read the temporary code using the Subaru Select Monitor or general scan tool. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>READ DIAGNOSTIC TROUBLE CODE (DTC)>OPERATION .
scientia non olet · About LEMON Manuals