LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) (2.0L) - Introduction >> Drive Cycle >> Procedure >> Preparation For Drive Cycle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For Drive Cycle

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and Clear Memory Mode, check that no DTC remains. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>CLEAR MEMORY MODE .
    NOTE: Perform the drive cycle after warming up the engine except when the engine coolant temperature at engine start is specified.
scientia non olet · About LEMON Manuals