Cockpit Display: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cockpit control module. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>ASSEMBLY
- Install the data communication module. (Model with telematics) Ref. to ENTERTAINMENT & MONITORING>DATA COMMUNICATION MODULE>INSTALLATION>DATA COMMUNICATION MODULE
- Connect each connector, and install the center information display assembly.CAUTION:
Do not allow the harnesses and cords to interfere with or get caught by other parts.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the panel assembly center and the ornament panel mid passenger. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CLUSTER>INSTALLATION
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY