Backup Battery
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the backup battery, and connect the connector.
- Install the battery cover using TORX® T10.
Tightening torque:
0.3 N.m (0.03 kgf-m, 0.2 ft-lb)
- Install the data communication module. Ref. to ENTERTAINMENT & MONITORING>DATA COMMUNICATION MODULE>INSTALLATION>DATA COMMUNICATION MODULE
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY