Power Amplifier: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION

NOTE:

The power amplifier assembly is installed under the front seat RH. Install the power amplifier assembly after sliding the front seat RH back and forth as necessary.

Connect each connector, and install the power amplifier assembly.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY