Section 11 (Entertainment System): Woofer: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION
- Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
- Install the speaker assembly woofer, and connect the connector.CAUTION:
Do not touch the cone.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the trim panel assembly rear shelf. Ref. to EXTERIOR/INTERIOR TRIM>REAR SHELF TRIM>INSTALLATION
- Install the trim panel assembly C pillar and the trim panel assembly C pillar LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION
- Install the backrest assembly and rear seat cushion assembly. Ref. to SEATS>REAR SEAT>INSTALLATION
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY