Transaxle Assembly: Remove, Install, and Overhaul
WARNING: This page is about the WRX Base, which is a different variant/trim than selected.
Includes: Inspect and replace all necessary Transmission and Differential components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 11.6 | A | |||
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| 0.8 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.9 | C | |||
| Combination Procedure: FLYWHEEL HOUSING &/OR SEAL: Remove & Replace: | ||||
| 1.1 | C | |||