Drive Cycle X
| DTC | Item | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P2004 | TGV CONTROL STUCK OPEN BANK 1 | - | 1 |
| P2005 | TGV CONTROL STUCK OPEN BANK 2 | - | 1 |
| P2006 | TGV CONTROL STUCK CLOSED BANK 1 | - | 1 |
| P2007 | TGV CONTROL STUCK CLOSED BANK 2 | - | 1 |
- Using the Subaru Select Monitor, perform the clear memory for «Engine». Refer to ENGINE (DIAGNOSTICS) (STI)>CLEAR MEMORY MODE>OPERATION .
- Start the engine.
- Place the gear shift lever in neutral position, and race the engine for 10 seconds or more.NOTE: Keep the engine speed at 3500 rpm or more.
- Read the temporary code using the Subaru Select Monitor or general scan tool. Refer to ENGINE (DIAGNOSTICS) (STI)>READ DIAGNOSTIC TROUBLE CODE (DTC)>OPERATION .