LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Knock Sensor >> Removal >> LH Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

LH Side

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the collector cover. Ref. to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>REMOVAL .
  3. Remove the clip from the air intake boot, and loosen the clamp.
    G13223823Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the air intake boot, and place it aside so that it does not interfere with the work.
    CAUTION: Be careful not to pull out the PCV hose.
    G13223824Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>INTAKE MANIFOLD ASSEMBLY>REMOVAL .
  6. Disconnect the connector (A).
  7. Remove the bolt securing the engine ground and the harness case, and remove the clip (B).
  8. Remove the bolts securing the engine wiring harness stay, and remove the engine wiring harness stay.
    NOTE: When it is difficult to remove the bolt, use a crowfoot wrench.
  9. Disconnect the connector (C) and remove the clip (D) and clip (E).
    G13223970Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the knock sensor together with the coupling harness using a claw-foot wrench.
    G13223971Courtesy of SUBARU OF AMERICA, INC.
  11. Disconnect the coupling harness.
scientia non olet · About LEMON Manuals