LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Symptoms and causes >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Symptoms and causes: Inspection

Symptoms Problem parts etc. Possible cause
Insufficient fuel supply Fuel pump fuse Blown-out fuse
Fuel pump relay Faulty relay operation
Fuel pump Faulty pump operation
Poor contact of connector
Fuel filter Clogging of filter
Fuel injector Clogging or malfunction of fuel injector
Fuel line pipe, hose or tube Clogging or deformation of pipe, hose or tube
Pressure regulator Seized or damaged diaphragm
Air in the fuel system Fuel percolation or excessive fuel shortage in tank
Fuel leakage Fuel pump assembly Defective gasket or improper installation of fuel pump assembly
Fuel sub level sensor Defective gasket or improper installation
Fuel line pipe, hose and tube Hole, cracking or improper installation of pipe, hose or tube
Fuel tank Hole, cracking in tank
Gasoline smell inside of compartment Fuel line pipe, hose and tube Hole, cracking or improper installation of pipe, hose or tube
Service hole cover Deformed cover, defective gasket or improper installation
CAUTION: Check that no fuel leakage occurs.
Saucer COMPL Damage or improper installation of saucer
Defective fuel gauge display Fuel level sensor or fuel sub level sensor Poor contact at resistance part
Seized or deformed arm
Deformed or damaged float
Connector connection is improper.
Combination meter Defective combination meter
Noise Fuel pump Defective pump or improper installation
NOTE:
  • Water generated in the fuel tank may be frozen at cold condition. It is preferable to keep the tank full with fuel if possible and to use a water removing agent or anti-freeze agent, etc. if necessary.
  • If a water removing agent or anti-freeze agent, etc. is used, follow the instruction for use.