Inspection Mode Ad
| DTC | Description & trouble part | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P26A3 | ENGINE COOLANT BYPASS VALVE "A" RANGE/PERFORMANCE |
Battery voltage: 10.9 V or more [Engine Coolant Temperature 1]: 90°C (194°F) or more | 2 |
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4-8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Engine Control System]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Turn the blower fan switch to OFF.
- Start the engine and let it idle.
- Turn the blower fan switch to ON and wait for at least 10 seconds.
- Turn the blower fan switch to OFF and wait for at least 10 seconds.
- Read the pending code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .