Inspection Mode X
| DTC | Description & trouble part | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P2004 | TGV CONTROL STUCK OPEN BANK 1 | - | 1 |
| P2005 | TGV CONTROL STUCK OPEN BANK 2 | - | 1 |
| P2006 | TGV CONTROL STUCK CLOSED BANK 1 | - | 1 |
| P2007 | TGV CONTROL STUCK CLOSED BANK 2 | - | 1 |
NOTE:
Perform the inspection mode after warming up the engine except that the engine coolant temperature at engine start is specified.
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4-8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Engine Control System]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Start the engine.
- Shift the select lever to "P" range, and let the engine race for 10 seconds or more.NOTE: Keep Engine speed at 3500 rpm or more.
- Read the pending code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .