LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Outback Base >> Repair and Diagnosis >> General Information >> Identification >> General Information & Specifications >> Pre-Delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Keyless Access System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Access System

CAUTION:
  • When performing the check, check one access key at a time, separating individual keys. 
  • Do not leave any separated access keys in the vehicle. 
NOTE:

The following inspections show the initial settings. When the settings are different from the initial settings, use Subaru Select Monitor to check the details of each setting for inspections. Ref. to  BODY CONTROL (DIAGNOSTICS)>DATA MONITOR>LIST  . 

NOTE:
  • The buzzer sounds twice and the hazard lights flash twice when unlocking. 
  • The buzzer sounds once and the hazard lights flash once when locking. 
G13946989Courtesy of SUBARU OF AMERICA, INC.
G13946990Courtesy of SUBARU OF AMERICA, INC.
G13946991Courtesy of SUBARU OF AMERICA, INC.

While carrying the access key, check that the rear gate is automatically opened when you put your hand close to the ornament rear while the rear gate is closed.

G13618285Courtesy of SUBARU OF AMERICA, INC.
CAUTION:

The mechanical key is a single groove type. Insert the mechanical key with the groove side facing the front side of the vehicle. 

G13946993Courtesy of SUBARU OF AMERICA, INC.
CAUTION:

Remove the mechanical key from the access key and hold the mechanical key.