Data Link Connector: Note
This connector is used for Subaru Select Monitor.
For detailed connection procedures, refer to "Application help".
CAUTION:
Do not connect any tools other than Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.
| Terminal No. | Contents | Measuring condition | Standard |
|---|---|---|---|
| (i221) No. 1 | - | - | - |
| (i221) No. 2 | - | - | - |
| (i221) No. 3 | - | - | - |
| (i221) No. 4 ←→ Chassis ground | GND | Always | 10 Ω or less |
| (i221) No. 5 ←→ Chassis ground | GND | Always | 10 Ω or less |
| (i221) No. 6 | CAN-H | - | - |
| (i221) No. 7 | - | - | - |
| (i221) No. 8 ←→ Chassis ground | Ignition power supply | When ignition switch is ON | Battery voltage |
| (i221) No. 9 | - | - | - |
| (i221) No. 10 | - | - | - |
| (i221) No. 11 | - | - | - |
| (i221) No. 12 | - | - | - |
| (i221) No. 13 | - | - | - |
| (i221) No. 14 | CAN-L | - | - |
| (i221) No. 15 | - | - | - |
| (i221) No. 16 ←→ Chassis ground | Battery power supply | Always | Battery voltage |