Fuel Pump: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION:

Be careful not to spill fuel.
Catch the fuel from the tubes using a container or cloth.
If the fuel gauge indicates that three quarter or more of the fuel is remaining, be sure to drain fuel before starting work to avoid the fuel to spill.

NOTE: Fuel pump assembly consists of fuel pump, fuel filter and fuel level sensor.

Release the fuel pressure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL>PROCEDURE>RELEASING OF FUEL PRESSURE .
Drain fuel. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL>PROCEDURE>DRAINING FUEL (WITH SUBARU SELECT MONITOR) .
Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Remove the second-row seat RH. Ref. to SEATS>SECOND SEAT>REMOVAL .
Turn over the floor mat, and remove the service hole cover RH.

Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from fuel pump.

Courtesy of SUBARU OF AMERICA, INC.
Remove the grommets, and remove the gasket.
NOTE: The gasket (a) is secured with the grommets (b).

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.
Disconnect the fuel delivery tube. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL DELIVERY AND EVAPORATION LINES>REMOVAL>QUICK CONNECTOR DISCONNECTION (TYPE F) .

Courtesy of SUBARU OF AMERICA, INC.
Remove the ring nut using the ST.
CAUTION:
- Be careful not to damage the fuel delivery tube with the ST.
- Before setting the ST, move the fuel delivery tube above the ST.
Preparation tool:

ST: ST FUEL PUMP (42099FL000)

Courtesy of SUBARU OF AMERICA, INC.
Take out the fuel pump assembly from the fuel tank, and disconnect the fuel sub delivery tube from the fuel pump assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL DELIVERY AND EVAPORATION LINES>REMOVAL>QUICK CONNECTOR DISCONNECTION (TYPE C) .
CAUTION: Be careful not to let the arm and float of the fuel level sensor contact the fuel tank.

Courtesy of SUBARU OF AMERICA, INC.