Special Tool

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	398177700	INSTALLER	Used for installing the transfer drive gear. Used for installing the bearing retainer. Used for installing the ball bearing of the reduction driven gear side in the transmission case. NOTE: Used together with INSTALLER (20099AE020). Used for installing the ball bearing (front side) of the front reduction drive gear. NOTE: Used together with INSTALLER (499757002).
Courtesy of SUBARU OF AMERICA, INC.	398497701	SEAT	Used for removing the transfer reduction driven gear. NOTE: Used together with REMOVER (498077600) and REMOVER (899864100). Used for removing the reduction driven gear. NOTE: Used together with REMOVER (498077600) and REMOVER (899864100). Used for removing and installing the ball bearing of reduction driven gear. NOTE: Used together with REMOVER (498077600) and REMOVER (899864100). Used for removing and installing the side bearing inner race. NOTE: Used together with PULLER ASSY (399703600) when removing. Used together with BUSHING 1-2 INSTALLER (499277100) when installing.
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing the roller bearing of the primary pulley side in the transmission case. Used for removing the roller bearing of the secondary pulley side in the transmission case. NOTE: Used together with CLAW (18760AA000). Used for removing the ball bearing of the reduction driven gear side in the transmission case. Used for removing the side bearing outer race. Used for removing the ball bearing of the converter case cover. NOTE: Used together with CLAW (18760AA000).
Courtesy of SUBARU OF AMERICA, INC.	399513600	INSTALLER	Used to install the rear drive shaft ball bearing.
Courtesy of SUBARU OF AMERICA, INC.	399703600	PULLER ASSY	Used for removing the side bearing inner race. NOTE: Used together with SEAT (398497701). PULLER ASSY (399703601) can also be used.
Courtesy of SUBARU OF AMERICA, INC.	498057300	INSTALLER	Used for installing the extension case oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498077400	REMOVER	Used for removing the ball bearing (front side) of the front reduction drive gear. NOTE: Used together with REMOVER (899864100).
Courtesy of SUBARU OF AMERICA, INC.	498077600	REMOVER	Used for removing the ball bearing of drive sprocket. NOTE: Used together with HOUSING BUSHING INSTALLER AND REMOVER (927720000). Used for removing the ball bearing of transfer reduction driven gear. NOTE: Used together with SEAT (398497701) and REMOVER (899864100). Used for removing ball bearing of reduction driven gear. NOTE: Used together with SEAT (398497701) and REMOVER (899864100). Used for removing the rear drive shaft. Used for removing the taper roller bearing inner race (front side) of drive pinion. Used for removing the ball bearing (rear side) of front reduction drive gear.
Courtesy of SUBARU OF AMERICA, INC.	498255400	PLATE	Used for measuring the backlash of the hypoid gear set.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for removing and installing transmission body.
Courtesy of SUBARU OF AMERICA, INC.	498497300	CRANKSHAFT STOPPER	Used for removing and installing the drive plate.
Courtesy of SUBARU OF AMERICA, INC.	498575400	OIL PRESSURE GAUGE ASSY	Used for measuring the transfer clutch pressure. NOTE: Used together with PRESSURE GAUGE ADAPTER (18681AA000), ADAPTER HOSE A (34099AC010) and ADAPTER HOSE B (34099AC020). Use the genuine O-ring (part No. 806908150) for installation.
Courtesy of SUBARU OF AMERICA, INC.	498897700	OIL PRESSURE ADAPTER SET	Used for measuring the secondary pressure. NOTE: Used together with PRESSURE GAUGE ADAPTER (18681AA000) and OIL PRESSURE GAUGE ASSY (18801AA000). Used for measuring line pressure. NOTE: Used together with PRESSURE GAUGE ADAPTER (18681AA010) and OIL PRESSURE GAUGE ASSY (18801AA000).
Courtesy of SUBARU OF AMERICA, INC.	499267300	STOPPER PIN	Used for adjusting the inhibitor switch.
Courtesy of SUBARU OF AMERICA, INC.	499277100	BUSHING 1-2 INSTALLER	Used for installing the reduction drive gear shaft. Used for installing the ball bearing of the reduction drive gear shaft. Used for installing the ball bearing of the transfer reduction driven gear. Used for installing the side bearing inner race. NOTE: Used together with SEAT (398497701).
Courtesy of SUBARU OF AMERICA, INC.	499277200	INSTALLER	Used for installing the taper roller bearing inner race (front side) of drive pinion.
Courtesy of SUBARU OF AMERICA, INC.	499575400	GAUGE	Used for adjusting the primary pulley shim. Used for adjusting the front reduction drive gear shim. Used for adjusting the front reduction driven gear shim (front side).
Courtesy of SUBARU OF AMERICA, INC.	499575600	GAUGE	Used for adjusting the thrust bearing of the rear drive shaft. Used for adjusting the transfer reduction driven gear shim. Used for adjusting the forward clutch washer. NOTE: Used together with PULLER SET (499737100). Used for inspecting clutch clearance. Used for adjusting the drive pinion shim.
Courtesy of SUBARU OF AMERICA, INC.	499737100	PULLER SET	Used for adjusting the thrust bearing of the rear drive shaft. NOTE: Use the rack only. Used for adjusting the forward clutch washer. NOTE: Use the rack only. Used together with GAUGE (499575600).
Courtesy of SUBARU OF AMERICA, INC.	499755602	PRESS SNAP RING	Used for installing the roller bearing of the secondary pulley side in the transmission case. NOTE: Used together with INSTALLER (20099AE020).
Courtesy of SUBARU OF AMERICA, INC.	499757002	INSTALLER	Used for installing the ball bearing (rear side) of the front reduction drive gear. NOTE: Used together with INSTALLER (398177700).
Courtesy of SUBARU OF AMERICA, INC.	499787700	WRENCH	Used for adjusting hypoid gear set backlash. NOTE: Used together with HOLDER (18667AA010). Used for checking and adjusting the tooth contact of hypoid gear set. NOTE: Used together with HOLDER (18667AA010). Used for removing and installing the drive pinion lock nut. NOTE: Used together with HOLDER (18667AA010).
Courtesy of SUBARU OF AMERICA, INC.	899580100	INSTALLER	Used for removing the transfer driven gear. NOTE: Used together with BEARING REMOVER (18767AA000).
Courtesy of SUBARU OF AMERICA, INC.	899864100	REMOVER	Used for removing the transfer reduction driven gear. NOTE: Used together with SEAT (398497701) and REMOVER (498077600). Used for removing the reduction driven gear. NOTE: Used together with SEAT (398497701) and REMOVER (498077600). Used for removing the ball bearing (rear side) of front reduction drive gear. NOTE: Used together with REMOVER (498077400).
Courtesy of SUBARU OF AMERICA, INC.	899904100	STRAIGHT PIN REMOVER	Used for removing the spring pin.
Courtesy of SUBARU OF AMERICA, INC.	927720000	HOUSING BUSHING INSTALLER AND REMOVER	Used for installing the oil seal of the oil pump chain cover. NOTE: Use BUSHING SHAFT (927880000) and BASE TUBE LATERAL LINK (927890000). Used for removing the ball bearing of drive sprocket. NOTE: Use BUSHING SHAFT (927880000). Used together with REMOVER (498077600).
Courtesy of SUBARU OF AMERICA, INC.	18270AA040	SOCKET	Used for removing and installing the test plug (transfer clutch pressure). NOTE: Used together with SPECIAL TOOL CONDENSER (73099SG000).
Courtesy of SUBARU OF AMERICA, INC.	18270KA020	SOCKET (E20)	Used for removing and installing the drive pinion retainer.
Courtesy of SUBARU OF AMERICA, INC.	18460AA040	CHECK BOARD	Used for measuring voltage and resistance of TCM terminals.
Courtesy of SUBARU OF AMERICA, INC.	18632AA000	STAND ASSY	Used for removing the transmission harness. Used for disassembling and assembling the transmission body.
Courtesy of SUBARU OF AMERICA, INC.	18651AA000	INSTALLER	Used for installing the ball bearing (front side) of the front reduction drive gear.
Courtesy of SUBARU OF AMERICA, INC.	18657AA000	INSTALLER	Used for removing and installing the transfer clutch piston. NOTE: Used together with COMPRESSOR SPECIAL TOOL (18762AA001). Used for installing the oil seal of inhibitor switch.
Courtesy of SUBARU OF AMERICA, INC.	18658AA021	WRENCH COMPL RETAINER	Used for removing and installing the differential side retainer. Used for adjusting hypoid gear set backlash.
Courtesy of SUBARU OF AMERICA, INC.	18667AA010	HOLDER	Used for adjusting hypoid gear set backlash. NOTE: Used together with WRENCH (499787700). Used for checking and adjusting the tooth contact of hypoid gear set. NOTE: Used together with WRENCH (499787700). Used for removing and installing the drive pinion lock nut. NOTE: Used together with WRENCH (499787700). Used for measuring the initial load on the taper roller bearing.
Courtesy of SUBARU OF AMERICA, INC.	18675AA000	DIFFERENTIAL SIDE OIL SEAL INSTALLER	Used for installing the differential side retainer oil seal.
Courtesy of SUBARU OF AMERICA, INC.	18681AA000	PRESSURE GAUGE ADAPTER	Used for measuring the secondary pressure. NOTE: Use the genuine O-ring (part No. 806911080) for installation. Used together with OIL PRESSURE ADAPTER SET (498897700) and OIL PRESSURE GAUGE ASSY (18801AA000). Used for measuring the transfer clutch pressure. NOTE: Use the genuine O-ring (part No. 806911080) for installation. Used together with OIL PRESSURE GAUGE ASSY (498575400), ADAPTER HOSE A (34099AC010) and ADAPTER HOSE B (34099AC020).
Courtesy of SUBARU OF AMERICA, INC.	18681AA010	PRESSURE GAUGE ADAPTER	Used for measuring line pressure. NOTE: Use the genuine O-ring (part No. 806916050) for installation. Used together with OIL PRESSURE ADAPTER SET (498897700) and OIL PRESSURE GAUGE ASSY (18801AA000).
Courtesy of SUBARU OF AMERICA, INC.	18760AA000	CLAW	Used for removing the ball bearing of the converter case cover. NOTE: Used together with PULLER ASSY (398527700). Used for removing the roller bearing of the secondary pulley side in the transmission case. NOTE: Used together with PULLER ASSY (398527700).
Courtesy of SUBARU OF AMERICA, INC.	18762AA001	COMPRESSOR SPECIAL TOOL	Used for removing and installing the transfer clutch piston. NOTE: Used together with INSTALLER (18657AA000). Used for removing and installing the reverse brake piston. Used for removing and installing the forward clutch piston. COMPRESSOR SPECIAL TOOL (18762AA000) can also be used.
Courtesy of SUBARU OF AMERICA, INC.	18763AA000	COMPRESSOR SHAFT	Used for adjusting hypoid gear set backlash.
Courtesy of SUBARU OF AMERICA, INC.	18767AA000	BEARING REMOVER	Used for removing the reduction drive gear shaft. Used for removing the transfer drive gear. NOTE: Used together with INSTALLER (899580100). Used for removing the bearing retainer. NOTE: Used together with INSTALLER (20099AE020).
Courtesy of SUBARU OF AMERICA, INC.	18769AA020	EXPANDER PULLEY	Used for removing and installing the secondary pulley.
Courtesy of SUBARU OF AMERICA, INC.	18801AA000	OIL PRESSURE GAUGE ASSY	Used for measuring the secondary pressure. NOTE: Used together with OIL PRESSURE ADAPTER SET (498897700) and PRESSURE GAUGE ADAPTER (18681AA000). Used for measuring line pressure. NOTE: Used together with OIL PRESSURE ADAPTER SET (498897700) and PRESSURE GAUGE ADAPTER (18681AA010).
Courtesy of SUBARU OF AMERICA, INC.	20099AE020	INSTALLER	Used for installing the drive sprocket ball bearing. Used for installing the ball bearing of the reduction driven gear side in the transmission case. NOTE: Used together with INSTALLER (398177700). Used for installing the roller bearing of the secondary pulley side in the transmission case. NOTE: Used together with PRESS SNAP RING (499755602). Used for installing the roller bearing of the primary pulley side in the transmission case. Used for installing the drive pinion retainer oil seal. Used for installing the ball bearing of the converter case cover.
Courtesy of SUBARU OF AMERICA, INC.	34099AC010	ADAPTER HOSEA	Used for measuring the transfer clutch pressure. NOTE: Used together with OIL PRESSURE GAUGE ASSY (498575400), PRESSURE GAUGE ADAPTER (18681AA000) and ADAPTER HOSE B (34099AC020).
Courtesy of SUBARU OF AMERICA, INC.	34099AC020	ADAPTER HOSEB	Used for measuring the transfer clutch pressure. NOTE: Use the genuine union screw (part No. 801914010) and gasket (part No. 803914060) for installation. Used together with OIL PRESSURE GAUGE ASSY (498575400), PRESSURE GAUGE ADAPTER (18681AA000) and ADAPTER HOSE A (34099AC010).
Courtesy of SUBARU OF AMERICA, INC.	38415AA070	AXLE SHAFT	Used for measuring the hypoid gear set backlash and adjusting the thrust washer. NOTE: This is the SUBARU genuine part.
Courtesy of SUBARU OF AMERICA, INC.	41099AC000	ENGINE SUPPORT ASSY	Used for removing and installing transmission body.
Courtesy of SUBARU OF AMERICA, INC.	73099SG000	SPECIAL TOOL CONDENSER	Used for removing and installing the test plug (transfer clutch pressure). NOTE: Used together with SOCKET (18270AA040).
Courtesy of SUBARU OF AMERICA, INC.	-	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures, refer to "Help" of application. Used together with interface for Subaru Select Monitor (such as DST-i and DST-010).