LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control System >> Select Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Release the shift lock and shift the select lever to the "N range". Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
  3. Remove the center exhaust cover (front). Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>REMOVAL .
  4. Disconnect the select cable from the transmission main body.
    CAUTION: Do not apply excessive load while holding the part (a).
    G14602401Courtesy of SUBARU OF AMERICA, INC.
    G14602402Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the adjusting nut (rear).
    G14602403Courtesy of SUBARU OF AMERICA, INC.
  6. Raise the claw of clamp and remove the select cable together with the clamp.
    CAUTION: Do not apply excessive load while holding the part (a).
    G14602404Courtesy of SUBARU OF AMERICA, INC.
    G14602405Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the clamp from the select cable.
  8. Remove the cable plate.
    G14602406Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals