Intake Manifold Assembly: Assembly
- Connect the fuel delivery pipe to the fuel pipe. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL DELIVERY AND EVAPORATION LINES>INSTALLATION>QUICK CONNECTOR CONNECTION (TYPE B) .
- Install the fuel pipe and fuel delivery pipe.
Tightening torque:
6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
- Install the vacuum pipe assembly. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>VACUUM PIPE ASSEMBLY>INSTALLATION .
- Install the check valve. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>CHECK VALVE>INSTALLATION .
- Install the manifold absolute pressure and intake air temperature sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>MANIFOLD ABSOLUTE PRESSURE AND INTAKE AIR TEMPERATURE SENSOR>INSTALLATION .
- Install the purge control solenoid valve. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>PURGE CONTROL SOLENOID VALVE>INSTALLATION .
- Set a new gasket, and temporarily install the EGR pipe No. 1.