Check Shift Lock Operation

Model without push button ignition switch

CHECK COMMUNICATION OF SUBARU SELECT MONITOR .
1. Turn the ignition switch to ON.
2. Using the Subaru Select Monitor, check whether communication to all systems can be executed normally.
Is the check result OK?

Yes: Go to 2.

No: For diagnostic procedures, refer to the LAN service information. Ref. to LAN SYSTEM (DIAGNOSTICS) (EXCEPT FOR HEV)>BASIC DIAGNOSTIC PROCEDURE .
CHECK SHIFT LOCK .
While the brake pedal is not depressed, check that it is possible to move the select lever from the "P" range to other ranges.

Is it possible to move the select lever from the "P" range to other ranges?

Yes: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .

No: Go to 3.
CHECK SHIFT LOCK .
While the brake pedal is depressed, check that it is possible to move the select lever from the "P" range to other ranges.

Is it possible to move the select lever from the "P" range to other ranges?

Yes: Go to 4.

No: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .
CHECK SHIFT LOCK .
While the brake pedal is not depressed, shift the select lever to "N" range.

Is it possible to move the select lever from the "N" range to the "P" range?

Yes: Go to 5.

No: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .
CHECK SHIFT LOCK .
1. Turn the ignition switch to ACC.
2. While the brake pedal is depressed, check that it is possible to move the select lever from the "N" range to the "P" range.
Is it possible to move the select lever from the "N" range to the "P" range?

Yes: Go to 6.

No: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .
CHECK KEY INTERLOCK .
1. Shift the select lever to other than "P" range.
2. Turn the ignition switch to OFF.
Can the ignition key be removed?

Yes: Perform the inspection of "KEY INTERLOCK CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>KEY INTERLOCK CANNOT BE LOCKED OR RELEASED .

No: Go to 7.
CHECK KEY INTERLOCK .
Shift the select lever to "P" range.

Can the ignition key be removed?

Yes: AT shift lock system is normal.

No: Perform the inspection of "KEY INTERLOCK CANNOT BE LOCKED OR RELEASED". Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>KEY INTERLOCK CANNOT BE LOCKED OR RELEASED .

Model with push button ignition switch

CHECK COMMUNICATION OF SUBARU SELECT MONITOR .
1. Turn the ignition switch to ON.
2. Using the Subaru Select Monitor, check whether communication to all systems can be executed normally.
Is the check result OK?

Yes: Go to 2.

No: For diagnostic procedures, refer to the LAN service information.
- Except for Crosstrek hybrid model: Ref. to LAN SYSTEM (DIAGNOSTICS) (EXCEPT FOR HEV)>BASIC DIAGNOSTIC PROCEDURE .
- Crosstrek hybrid model: Ref. to LAN SYSTEM (DIAGNOSTICS) (HEV)>BASIC DIAGNOSTIC PROCEDURE .
CHECK SHIFT LOCK .
While the brake pedal is not depressed, check that it is possible to move the select lever from the "P" range to other ranges.

Is it possible to move the select lever from the "P" range to other ranges?

Yes: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED".
- Except for Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .
- Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (CROSSTREK HYBRID MODEL) .
No: Go to 3.
CHECK SHIFT LOCK .
While the brake pedal is depressed, check that it is possible to move the select lever from the "P" range to other ranges.

Is it possible to move the select lever from the "P" range to other ranges?

Yes: Go to 4.

No: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED".
- Except for Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .
- Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (CROSSTREK HYBRID MODEL) .
CHECK SHIFT LOCK .
While the brake pedal is not depressed, check that it is possible to move the select lever from the "N" range to "P" range.

Is it possible to move the select lever from the "N" range to the "P" range?

Yes: Go to 5.

No: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED".
- Except for Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .
- Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (CROSSTREK HYBRID MODEL) .
CHECK SHIFT LOCK .
1. Turn the ignition switch to ACC.
2. While the brake pedal is depressed, check that it is possible to move the select lever from the "N" range to the "P" range.
Is it possible to move the select lever from the "N" range to the "P" range?

Yes: AT shift lock system is normal.

No: Perform the inspection of "SELECT LEVER CANNOT BE LOCKED OR RELEASED".
- Except for Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (EXCEPT FOR CROSSTREK HYBRID MODEL) .
- Crosstrek hybrid model: Ref. to CONTROL SYSTEMS>AT SHIFT LOCK CONTROL SYSTEM>INSPECTION>SELECT LEVER CANNOT BE LOCKED OR RELEASED (CROSSTREK HYBRID MODEL) .