Inspection Mode Ac
DTC DESCRIPTION - INSPECTION MODE AC
| DTC | Description & trouble part | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P26A5 | ENGINE COOLANT BYPASS VALVE "A" POSITION SENSOR CIRCUIT RANGE/PERFORMANCE | [Engine Coolant Temperature 1]: 0°C (32°F) or more | 2 |
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Engine Control System]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Start the engine and let it idle.
- Turn the ignition switch to OFF and wait for approx. 3 minutes or more.
- Turn the ignition switch to ON, and read the pending code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .