Inspection Mode J
DTC DESCRIPTION - INSPECTION MODE J
| DTC | Description & trouble part | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P058C | BATTERY MONITOR MODULE Temperature MONITORING PERFORMANCE | [IG OFF Elapsed Time]: 6 hours or more | 2 |
| P2610 | ECM/PCM ENGINE OFF TIMER PERFORMANCE | - | 2 |
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Idle the engine for 15 minutes or more.
- Turn the ignition switch to OFF.
- After at least 10 hours passed from the start of step 3), read the pending code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)