Engine Wiring Harness
- Structural diagram 1
| (1) | Throttle position sensor connector |
| (2) | Multi-wire connector |
| (3) | Guide it over the top of fuel delivery pipe. |
| (4) | Manifold absolute pressure sensor connector |
| (5) | Purge control solenoid valve connector |
| (6) | Secure the clip to the fuel pipe. |
| (7) | PCV hose |
| (8) | Guide it over the top of PCV hose. |
| (9) | Clip |
| (10) | The gap after the stopper is inserted must be 3 mm (0.118 in) or less. |
| (11) | M/B connector |
| (12) | ECM connector (For installation and removal, refer to "Engine Control Module (ECM)".) Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>ENGINE CONTROL MODULE (ECM) . |
| (13) | Push in the lock lever securely. |
| (14) | Secure the harness to the clip. |
| (15) | Secure the harness case to the harness stay. |
| • |
|
| (1) | Thermo control valve ASSY connector |
| (2) | CVT docking connector (30P) |
| (3) | Fuel injector connector (#4) coupling harness connector |
| (4) | Knock sensor LH side coupling harness connector |
| (5) | Secure the clip to the screw hole. |
| (6) | High-pressure fuel pump connector |
| (7) | Fuel injector connector (#2) |
| (8) | Crankshaft position sensor connector |
| (9) | Fuel injector connector (#1) |
| (10) | Fuel pressure sensor connector |
| (11) | Fuel injector connector (#3) |
| (12) | Knock sensor RH side coupling harness connector |
| (13) | Secure the clip to the harness case. |
| (14) | Engine wiring harness stay |
| (15) | Secure the clip to the engine wiring harness stay. |
| (16) | Engine ground (fastened together with harness case) |
Tightening torque: N.m (kgf-m, ft-lb)
T1: 6.4 (0.7, 4.7)
T2: 19 (1.9, 14.0)
- Structural diagram 3
| (1) | Outlet engine coolant temperature sensor connector |
| (2) | EGR control valve connector |
| (3) | Oil pressure switch (Refer to "Oil Pressure Switch" of "LUBRICATION" for installation. Ref. to LUBRICATION (H4DO)>OIL PRESSURE SWITCH>INSTALLATION .) |
| (4) | Engine oil temperature sensor connector |
| (5) | Intake oil control solenoid connector LH |
| (6) | Secure the clip to the screw hole. |
| (7) | Exhaust oil control solenoid connector LH |
| (8) | Inlet engine coolant temperature sensor connector |
| (9) | Oil level switch connector |
| (10) | Exhaust oil control solenoid connector RH |
| (11) | Intake oil control solenoid connector RH |
| (12) | Tumble generator valve actuator connector LH |
| (13) | Ignition coil connector (#4) |
| (14) | Ignition coil connector (#2) |
| (15) | Exhaust camshaft position sensor connector LH |
| (16) | Intake camshaft position sensor connector LH |
| (17) | Intake camshaft position sensor connector RH |
| (18) | Exhaust camshaft position sensor connector RH |
| (19) | Ignition coil connector (#1) |
| (20) | Ignition coil connector (#3) |
| (21) | Tumble generator valve actuator connector RH |
| (22) | Secure a clip to the intake manifold assembly. |