LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> Outback Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> ABS Sequence Control >> Operation >> Abs Sequence Control With SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Sequence Control With SUBARU Select Monitor

NOTE:
  • While the ABS sequence control is being performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve operation.
  • ABS sequence control can be started by the Subaru Select Monitor.
  • In the event of any trouble, the ABS sequence control will not operate.
  1. Using the Subaru Select Monitor, select [ABS Sequence Control Mode] in [Work Support] of [Brake Control]. Ref. to BRAKE CONTROL (DIAGNOSTICS)>WORK SUPPORT .
  2. Perform the following operations according to the display screen.
    1. When using a brake tester, depress the brake pedal with a force of 100 N (10.2 kgf, 22.5 lbf).
    2. When using a pressure gauge, press the brake pedal so that the pressure gauge indicates 3, 500 kPa (36 kgf/cm2 , 511 psi).
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals