VDC Sequence Control With SUBARU Select Monitor

NOTE:

While the VDC sequence control is performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve is operated.
VDC sequence control can be started by Subaru Select Monitor.
In the event of any trouble, sequence control will not operate.

Using the Subaru Select Monitor, select [VDC Check Mode] in [Work Support] of [Brake Control]. Ref. to BRAKE CONTROL (DIAGNOSTICS)>WORK SUPPORT .
Perform the operation according to the display screen.
The brake system being operated is displayed on the Subaru Select Monitor.