LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> Outback Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (2.5L) >> Oil Control Solenoid >> Removal >> Intake
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Control Solenoid: Removal: Intake

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE DUCT>REMOVAL .
  3. Disconnect the connector (A) and remove the oil control solenoid.
    G13223960Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the O-ring and back-up ring from the oil control solenoid.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector (A) and remove the oil control solenoid.
    G13618492Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the O-ring and back-up ring from the oil control solenoid.
scientia non olet · About LEMON Manuals