Inrush Current Reduction Relay: Installation

Fig 1: Starter Motor Components Location With Torque Specification

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: N.m (kgf-m, ft-lb)

T1: 6.4 (0.7, 4.7)

T2: 11 (1.1, 8.1)

Install the ICR relay.
Install the motor cable.
CAUTION: Install the motor cable while not letting it contact the magnet switch external parts.
Install the cable stay and adapter harness.
Install the starter. Ref. to STARTING/CHARGING SYSTEMS (H4DOTC)>STARTER>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .