Body Control

NOTE: Other than for C0 model

IMMOBILIZER SYSTEM (BODY CONTROL) DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC	Description	Reference
B1402	IMMOBILIZER KEY COLLATION	Ref. to IMMOBILIZER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1402 IMMOBILIZER KEY COLLATION .
B1403	IMMOBILIZER SUB CONTROL MODULE COLLATION	Ref. to IMMOBILIZER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1403 IMMOBILIZER SUB CONTROL MODULE COLLATION .
B1404	IMMOBILIZER SUB CONTROL MODULE COMMUNICATION	Ref. to IMMOBILIZER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1404 IMMOBILIZER SUB CONTROL MODULE COMMUNICATION .
B140A	IMMOBILIZER SUB CONTROL MODULE NON-VOLATILE MEMORY	Ref. to IMMOBILIZER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B140A IMMOBILIZER SUB CONTROL MODULE NON-VOLATILE MEMORY .
B1410	TRANSPONDER COMMUNICATION	Ref. to IMMOBILIZER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1410 TRANSPONDER COMMUNICATION .
B1411	IMMOBILIZER ANTENNA	Ref. to IMMOBILIZER (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B1411 IMMOBILIZER ANTENNA .

NOTE: The starter relay control is performed in immobilizer system. When the body integrated unit detects a non conformity of reference code, it immediately outputs a starter relay cut signal to ECM, and then ECM stops the starter relay operation. In this case, engine does not start, and DTC is not recorded in ECM. Therefore, check DTC on the body integrated unit to identify the cause of the engine not starting.