LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Auto Headlight Beam Leveler Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Headlight Beam Leveler Control Module: Removal

  1. When replacing the auto headlight beam leveler Control Module, store the [Headlight / Foglight] customizing information. Ref. to COMMON (DIAGNOSTICS)>CUSTOMIZE>OPERATION > SAVE SETTINGS / READ SETTINGS
  2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the auto headlight beam leveler Control Module.
    1. Disconnect the connector.
    2. Remove the nuts, and remove the auto headlight beam leveler Control Module.
      G13200867Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals