LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System - Seats >> Power Seat System >> Installation >> Power Seat Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Seat Control Module

  1. Install the ECM seat memory.

    Tightening torque: 

    6.0 N.m (0.6 kgf-m, 4.4 ft-lb)

  2. Install the driver's seat. Ref. to SEATS>FRONT SEAT>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. Initialize the power seat control module. Ref. to SEATS>POWER SEAT SYSTEM>ADJUSTMENT .
  5. When the seat position memory Control Module or the front seat equipped with the seat position memory Control Module with registered memory was replaced with a new part, perform the variant work. (Model with seat position memory) Ref. to POWER SEAT MEMORY(DIAGNOSTICS)>WORK SUPPORT>OPERATION
scientia non olet · About LEMON Manuals