LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Oil Control Solenoid >> Installation >> Intake >> LH Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

LH Side

  1. Install the backup ring to the oil control solenoid.
  2. Using a new O-ring, install the oil control solenoid.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  3. Connect the connector.
  4. Hold the engine wiring harness with the clip.
  5. Install the reservoir tank. Ref. to COOLING (H4DOTC)>RESERVOIR TANK>INSTALLATION .
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals