LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Oil Level Switch >> Removal >> When Removing The CROSSMEMBER COMPL Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When Removing The CROSSMEMBER COMPL Front

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Drain the engine oil. Ref. to LUBRICATION (H4DOTC)>ENGINE OIL>REPLACEMENT .
  3. Remove the crossmember COMPL front. Ref. to FRONT SUSPENSION>CROSSMEMBER>REMOVAL .
  4. Remove the engine mounting LH.
    G14601534Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the clip holding the oil level switch harness and disconnect the connectors.
    G13199164Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the clip securing the harness, and remove the oil level switch.
    G13199185Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals