LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> CPC Pressure Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CPC Pressure Sensor: Installation

  1. Using a new O-ring, install the CPC pressure sensor.

    Tightening torque: 

    3.4 N.m (0.3 kgf-m, 2.5 ft-lb)

  2. Connect the connector.
  3. Install the intake duct No. 2. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTAKE DUCT>INSTALLATION>INTAKE DUCT NO. 2 .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals