Mass Air Flow and Intake Air Temperature Sensor: Installation
- Install the mass air flow and intake air temperature sensor, and connect the connector.CAUTION:
- When reusing the mass air flow and intake air temperature sensor, check the O-ring and install it so that it is not damaged or get caught.
- If the O-ring is faulty, replace it with a new mass air flow and intake air temperature sensor.
Tightening torque:
1 N.m (0.1 kgf-m, 0.7 ft-lb)
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .