Inspection Mode Q
| DTC | Description & trouble part | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P0017 | CRANKSHAFT POSITION - CAMSHAFT POSITION CORRELATION BANK 1 SENSOR B | [Coolant Temp.]: 80°C (176°F) or more | 2 |
| P0019 | CRANKSHAFT POSITION - CAMSHAFT POSITION CORRELATION BANK 2 SENSOR B | 2 |
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Engine]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Idle the engine for at least one minute.
- Read the pending code of DTC using the Subaru Select Monitor or general scan tool.NOTE:
- For detailed operation procedures, refer to "COMMON (DIAGNOSTICS)". Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
- If the DTC is not displayed on the Subaru Select Monitor or general scan tool display screen, the trouble is resolved.