LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Primary Pressure Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Pressure Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of primary pressure sensor, replace it with a new part.
  1. Install a new O-ring.
    NOTE: Apply CVTF to the O-rings.
  2. Install the primary pressure sensor and connect the connector.

    Tightening torque: 

    13 N.m (1.3kgf-m, 9.6ft-lb)

  3. Install the transmission body.CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION 
scientia non olet · About LEMON Manuals