Fuel Insulator: Installation

CAUTION:

If substantial amount of fuel or parts cleaner come into contact with the fuel insulator, replace it with a new one.
If only small amount of fuel comes into contact with the fuel insulator, wait for the fuel evaporate before installing it.

Install the fuel pipe insulator No. 1 (B), and connect the connector (A) to the fuel injector #3.
Install the fuel pipe insulator No. 5 (D), and connect the connector (C) to the fuel injector #4.

Courtesy of SUBARU OF AMERICA, INC.
Install the fuel pipe insulator No. 2 (A) and fuel pipe insulator No. 4 (B).

Courtesy of SUBARU OF AMERICA, INC.
Secure the engine wiring harness with the bolts.
Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.
Install the fuel pump insulator (A) and fuel pipe insulator No. 3 (B).

Courtesy of SUBARU OF AMERICA, INC.
Install the bracket air conditioner. Ref. to AIR CONDITIONER>COMPRESSOR>INSTALLATION .
Temporarily install the bolt that secures the A/C compressor.

Courtesy of SUBARU OF AMERICA, INC.
Install the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>INTAKE MANIFOLD ASSEMBLY>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Check refrigerant leaks. Ref. to AIR CONDITIONER>REFRIGERANT LEAK CHECK>INSPECTION .