Fuel Insulator: Removal

Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>INTAKE MANIFOLD ASSEMBLY>REMOVAL .

Remove the bracket air conditioner.

NOTE: This procedure is required to remove the fuel pump insulator.

Remove the bolt securing the A/C compressor.

Courtesy of SUBARU OF AMERICA, INC.

While lifting the A/C compressor, remove the bracket air conditioner.

CAUTION:

Do not bend the pipe portion of the hose pressure discharge and the hose pressure suction.
Be careful not to drop the A/C compressor.
Be careful not to damage the adjacent parts with the A/C compressor.

Courtesy of SUBARU OF AMERICA, INC.

Remove the fuel pump insulator (A) and fuel pipe insulator No. 3 (B).

Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts securing the engine wiring harness.

Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pipe insulator No. 2 (A) and fuel pipe insulator No. 4 (B).

Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector (A) from fuel injector #3, and remove the fuel pipe insulator No. 1 (B).
Disconnect the connector (C) from fuel injector #4, and remove the fuel pipe insulator No. 5 (D).

Courtesy of SUBARU OF AMERICA, INC.