2.0 L Model
- Place a new gasket and install the engine coolant temperature sensor.
Tightening torque :
16 N.m (1.6 kgf-m, 11.8 ft-lb)
- Connect the connector.
- Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE BOOT>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Fill engine coolant. Ref. to COOLING (H4DO)>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .