LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Crosstrek Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System >> Fuel Insulator >> Installation >> 2.0 L Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.0 L Model

  1. Install the fuel pipe insulator.
    CAUTION:
    • If substantial amount of fuel or parts cleaner come into contact with the fuel pipe insulator, replace it with a new part  .
    • If only small amount of fuel comes into contact with the fuel pipe insulator, wait for the fuel to evaporate before installing it  .
  2. Hold the engine wiring harness with the clip.
  3. Install the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>INTAKE MANIFOLD ASSEMBLY>INSTALLATION>2.0 L MODEL .
  4. Install the air intake boot. Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE BOOT>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals