Active Test: List

Item

Contents

Execution condition

Electric oil pump control (Relay ON/OFF drive)

ON/OFF of the electric oil pump relay (Auto Start Stop) can be set.

Electric oil pump control (Pump ON/OFF drive)

Except for WILDERNESS MODEL Command duty of the electric oil pump (Auto Start Stop) can be set to 10 →70% (for 120 seconds).
WILDERNESS MODEL Command duty of the electric oil pump (Auto Start Stop) can be set to 10 → 55% (for 120 seconds).

Sub power supply control (ON/OFF Dr.)

DC/DC converter can be set to ON (2 seconds).

"Common execution condition" established

Engine stop control ⁽¹⁾

Auto Start Stop can be performed without driving the vehicle.

Auto Start Stop condition is established Ref. to AUTO START STOP (DIAGNOSTICS)>DATA MONITOR .

NOTE:

Before performing the active test for Auto Start Stop, execution conditions listed below must be met in each item .

⁽¹⁾	The restart conditions after stopping the engine are the same as that of "Auto Start Stop restart conditions". Ref. to AUTO START STOP (DIAGNOSTICS)>DATA MONITOR>LIST .

Common execution condition

Item	Value
Ignition Switch (Auto Start Stop)	ON
System Voltage (Auto Start Stop)	12.1 V or more
Engine Speed (Auto Start Stop)	0 rpm
Vehicle Speed	0 km/h (0 MPH)
Idling Stop Control	Other than during control