LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Engine Coolant Temperature Sensor >> Removal >> Inlet Engine Coolant Temperature Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inlet Engine Coolant Temperature Sensor

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Drain engine coolant. Ref. to COOLING (H4DO)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT .
  3. Remove the front exhaust pipe. Ref. to EXHAUST (H4DO)>FRONT EXHAUST PIPE>REMOVAL .
  4. Disconnect the connector (A) and disconnect the connector (B) from the chain cover.
  5. Remove the bolt (C) securing the harness stay.
  6. Using a flare socket, remove the inlet engine coolant temperature sensor.
    G13223941Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the inlet engine coolant temperature sensor from the harness stay.
CAUTION: Do not remove the inlet engine coolant temperature sensor harness from the harness stay unless replacing the inlet engine coolant temperature sensor.
scientia non olet · About LEMON Manuals