LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Extension Case Oil Seal >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Extension Case Oil Seal: Replacement

  1. Release the parking brake.
  2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Release the shift lock using a screwdriver, etc. and shift the select lever to the "N range".
    G13868655Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the propeller shaft. Ref. to PROPELLER SHAFT/DRIVE SHAFT/AXLE>PROPELLER SHAFT>REMOVAL .
  5. Remove the extension case oil seal using a flat tip screwdriver wrapped with protection tape, etc.
    G13592011Courtesy of SUBARU OF AMERICA, INC.
  6. Using the ST, install a new extension case oil seal.
    NOTE: Apply CVTF to the oil seal lip and peripheral surface.

    Preparation tool: 

    ST: INSTALLER (498057300)

    G13225669Courtesy of SUBARU OF AMERICA, INC.
  7. Install the propeller shaft. Ref. to PROPELLER SHAFT/DRIVE SHAFT/AXLE>PROPELLER SHAFT>INSTALLATION .
  8. Release the shift lock using a screwdriver, etc. and shift the select lever to the "P range".
  9. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  10. Apply the parking brake.
  11. Check the CVTF level. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>CVTF>INSPECTION .
scientia non olet · About LEMON Manuals