LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Inhibitor Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inhibitor Switch: Installation

  1. Temporarily connect the inhibitor switch, and connect the connector.
  2. Install the shifter arm and fix with a new spring pin.
  3. Apply grease to the shifter arm.

    Preparation items: 

    Grease: NIPPON GREASE NIGTIGHT LTS No. 2 or equivalent

    G00674378Courtesy of SUBARU OF AMERICA, INC.
  4. Connect the select cable.
    CAUTION: Do not apply excessive load while holding the part (a).
    G13591814Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Set the washer before installing the snap pin.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

    G13225470Courtesy of SUBARU OF AMERICA, INC.
  5. Adjust the inhibitor switch. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>INHIBITOR SWITCH>ADJUSTMENT .
  6. Release the shift lock using a screwdriver, etc. and shift the select lever to the "P range".
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals