X MODE Switch: Inspection
- Check the resistance between connector terminals.
Terminal No. Inspection conditions Standard 1 - 4 Counterclockwise (hold) 0 Ω PUSH (hold) Approx. 1 kΩ Clockwise (hold) Approx. 3.67 kΩ - Apply battery voltage between the connector terminals to check lighting status of illumination.CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.
| Terminals No. | Inspection conditions | Judgment standards |
|---|---|---|
| 2 (+) - 3 (-) | Apply battery voltage. | Light ON |