Air Intake Boot: Installation

Install the air intake boot.

If PCV hose has been disconnected, connect the PCV hose and set the air intake boot.

Install the clips, and tighten the clamps.

NOTE:

Align the clamp threaded portion with the stopper of the air intake boot. (2.0 L model)

Courtesy of SUBARU OF AMERICA, INC.

Align the clamp hole with the protrusion of the air intake boot. (2.5 L model)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque :

3 N.m (0.3 kgf-m, 2.2 ft-lb)