April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Seating Sensor Mat

Disconnect the connector of the seat belt switch and seating sensor mat.

Measure the resistance between the terminals when the seating sensor mat is in each of the following operation conditions.

RH

Terminal No.	Inspection conditions	Standard	Circuit
1 - 2	Do not sit on the rear seat RH	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 2	Sit on the rear seat RH	1 Ω or less	Courtesy of SUBARU OF AMERICA, INC.

CTR

Terminal No.	Inspection conditions	Standard	Circuit
1 - 3	Do not sit on the rear seat CTR	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 3	Sit on the rear seat CTR	1 Ω or less	Courtesy of SUBARU OF AMERICA, INC.

LH

Terminal No.	Inspection conditions	Standard	Circuit
2 - 4	Do not sit on the rear seat LH	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
2 - 4	Sit on the rear seat LH	1 Ω or less	Courtesy of SUBARU OF AMERICA, INC.

Replace the rear seating sensor mat together with the seat cushion pad if the inspection result is not within the standard value.