Select Cable: Removal

Release the shift lock and shift the select lever to the "N range". Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
Remove the center exhaust cover and rear exhaust pipe.
H4DO model:

Ref. to EXHAUST (H4DO)>REAR EXHAUST PIPE>REMOVAL .

H4DOTC model:

Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>REMOVAL .
Remove the center exhaust pipe (rear). (H4DOTC model) Ref. to EXHAUST (H4DOTC)>CENTER EXHAUST PIPE>REMOVAL>CENTER EXHAUST PIPE (REAR) .
Disconnect the select cable from the transmission main body.
CAUTION: Do not apply excessive load while holding the part (a).

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.
Remove the adjusting nut (rear).

Courtesy of SUBARU OF AMERICA, INC.
Raise the claw of clamp and remove the select cable together with the clamp.
CAUTION: Do not apply excessive load while holding the part (a).

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp from the select cable.
Remove the cable bracket.

Courtesy of SUBARU OF AMERICA, INC.
Remove the connector pin.
NOTE: Perform this procedure only when required.

Courtesy of SUBARU OF AMERICA, INC.