Outer Mirror Control Module: Installation
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION
.
- Install the outer mirror Control Module.
- Install the trim panel front door.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- When the outer mirror Control Module was replaced with a new part, perform the following steps.
- Using the Subaru Select Monitor, perform [Write Control module setting information] in [Work Support] of [Door Mirror (Driver)] or [Door Mirror (Passenger)]. Ref. to DOOR MIRROR (DIAGNOSTICS)>WORK SUPPORT>OPERATION>WRITE CONTROL MODULE SETTING INFORMATION .
- Perform file writing according to the display screen.
- Setting information writing is completed.