Inspection Mode 3: Notes

Diagnostic procedure:

1. Using the Subaru Select Monitor, perform the clear memory of [Power Window (Driver)]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
2. Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
   NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step  1.
3. Using the driver's side power window switch, operate the manual down feature and check that the window rolls down.
4. Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .